NOKIA 3110C REPAIRING FAULTS

Here is the latest BB5 model i.e. Nokia 3110c with its slim body and alot of features in it. This handset with mega pixel camera, and bluetooth function, memory card features and fm radio in it makes it more popular in the market and it is some solid handset. Its repair is also more easy and cheap. If it has display not coming problem, then it has two small glass display ic in it, one is near on/off switch and the other is at backside near display connector. If it is dead in hardware fault like water damaged, then first of all we have to do check software of it, if it says 1st boot ok and flashing complete and local mode comes and also full ui setting is done, then set will get on, and if it says 1st boot error, then first check its charging ic and one more supply ic upper side of charging ic, and also check its light ic, if one of these are short with water, then also handset will not get on, so just remove then , and make the balls of ic and then paste it again properly, if still it not get ok, then repair cpu ic of it. If 3110c has memory card problem not showing, then just change black and silver memory card ic of it. Its keypad ic is also some different than 6600, it has small keypad ic with one middle dot blank in it and if you got keys not pressing problem, then change it, sometimes what happened that its volume keys get switched on due to water inside it, in that case also no keypads work at all, and automatic its volume go up and down, so we have to change that volume switches also in it.

ABOUT NOKIA 2650 MODEL FAULTS

Well, here today me with summary and solutions about nokia 2650 handset. It was also the first folding handset in Nokia company, This handset has white keypad buttons of rubber from top of the handset to bottom. Its folding feature was the most attractive and beautiful thing that makes people to buy that. But because of one problem, it has alot of drawbacks in it for maintenace and repairing i.e. Its flex cable which join two parts of it, display portion and main board portion. Actualy because of using it as fold daily alot of times, after some days its flex cable get damaged soon, And alot of combined faults comes in it, like insert sim problem, automatic off and restart and network problem in it, means the whole upper portion of display and insert sim, speaker all are attached with flex cable. And the major thing is that its flex cable changing procedure is very lengthy and difficult. And we have always to change it with original flex cable, because duplicates are not so efficient. Well if set is going on blinking and blinking, then it could be get ok with its flashing software. But if all files get copied in it, then it get ok, and if it get stop in between, then handset will not get switched on, then we have to see its hardware fault in it i.e of may be flash ic, or cpu. overall, its not good going handset in a long run. After that Nokia understands its response and then he covered alot of things in further handsets.

NOKIA NGAGE QD SOLUTIONS

Hi dear viewers, this is a unique appearance handset in a D- SHAPE. By lookwise its also attractive and a very smart multimedia handset in which memory card feature, bluetooth functions are available and has Arena online games too, if u have activated gprs service in it. Its repair is some different from other nokia pcbs, because it has some similar ics like glass ics i.e display ic, ringer ic, light ic, keypad ic. It also has boot ic as other nokia wd2 handsets have it. If It has ringer problem like songs not wokring, then, we have to check its ringer tracks, and then after change its ringer ic. If it has lcd not coming or in white light, then first try to change its lcd, then after check its display ic, remove it and make the jumpers in right way, for that picture i will send u later, or just change its display ic. If its keys not working, then check its straight pins alot of in numbers touching the upper key board pcb, if still not work, then change remove keypad ic, and make its jumpers, and if after that also not work, then change keypad ic. if it got charging problem then change its charging jeck first. if not then see its charging ic. Bluetooth ic problem can also easily solved by just change its bluetooth ic. The rest of solutions will discuss later, just post by comments.

3650 NOKIA REPAIRING

NOKIA 3650 handset is a beautiful round shaped from bottom, some light in weight than NGAGEQD. Its round body with round keypads and rectangular shape makes it some different and attractive appearance. It has also bluetooth, fm, memory card . In this handset there is also boot ic in it. This handset supports good internet speed with gprs or dial up connections. It has also advance internal memory. It has good pixel camera by which we can take still pics and video too as long as we need, depends on capacity of its DV Memory card.If its camera does not work, then first try to change its camera, if still not get ok, then make its camera jumpers that i will share with u some other time with help of its jumper pic. One precaution has to take of virus, like we should not use more bluetooth from other handset as it is risky of virus or if u have also load your memory card from any shop, then also you have to see that either he has good antivirus in his pc or not. Because if u got any virus problem in it, the you can face problems like no dial call list , miss call, recieve call, or sms sending automaticaly deducting your money from your card or phone would get hang or restart as you open gallery or functions. Then it would get ok by flashing with ufs with latest version files. Nokia 3650 not get so popular because of some drawbacks in it like its weight and its size is some big and difficult to handle in your pocket, we can play also alot of java games in it.

NOKIA 7610 REPAIRING

NOKIA 7610 handset is a beautiful and some light in weight than 6600. Its glossy shining body in some round and rectangular shape makes it some different and attractive appearance. It has also bluetooth, fm, memory card and have dku-5 jeck, through which we can also make it communicate with computer with help of usb data cable. In this handset there is also boot ic in it. This handset supports good internet speed with gprs or dial up connections. It has also advance internal memory. It has good pixel camera by which we can take still pics and video too as long as we need, depends on capacity of its DV Memory card. If its camera does not work, then first try to change its camera, if still not get ok, then make its camera jumpers that i will share with u some other time with help of its jumper pic. One precaution has to take of virus, like we should not use more bluetooth from other handset as it is risky of virus or if u have also load your memory card from any shop, then also you have to see that either he has good antivirus in his pc or not. Because if u got any virus problem in it, the you can face problems like no dial call list , miss call, recieve call, or sms sending automaticaly deducting your money from your card or phone would get hang or restart as you open gallery or functions. Then it would get ok by flashing with ufs with latest version files.

NOKIA 3230 repair solutions

Well today here i am to discuss about nokia 3230 handset, which is good looking and comfortable handset. But there comes problems in its maintenance, either we can say its maintenance is some costly comparitively to other handsets. Its one drawback is, that its on/off switch, camera, display i.e. lcd and joystick are all on front pcb board, it has two pcbs, one is of keyboard and other is main board which are attached by the help of flex cable, and its repairing of flex cable is very difficult, so these handsets could not get so popular in nokia world. Because when we have to repair its lcd problem or camera problem or joystick then we have to change its whole front pcb i.e very much costly. Then it has keypad ic, display ic in it, if they get damaged, then we can repair it by replacing them or we can make all jumpers in it without ic, their jumper pics will post here later and its network fault is also very difficult to repair. So overall, feature wise its very nice handset with memory card, bluetooth, camera with good megapixel, but due to its some repairing drawbacks, it is still behind in the que. Well it has also boot ic near right side of battery conector, which have to be replaced if get damaged to get rid of nokia pause on display problem. Its small battery is good backup battery, but it should be charged only in limited period around 1-2 hours, not more than that, if u do , then it will get destroyed, and charger of it should always use original one, that output good supply to all components as per requried.

NOKIA 6600 REPAIRING

Nokia 6600 handset is an excellent colored mobile with alot of features. This is Wd2 mobile, and its good features makes it famous very much. It was the first nokia handset that launched in the market with camera and memory card and bluetooth function in it. This handset have alot of integrated circuits in it, It has 4 Flash ROM ic, and one RAM IC, CPU, UEM and one boot ic, which boots the handset at starting when we switch on the phone, nokia comes and blinks once and then handset gets on, If its boot ic gets damaged by water or by any reason, then it should be replaced, try to use the original boot ic from another handset, like 6600, 7610, 3230 or many more which have same boot ic. If boot ic is not ok , then handset will remain on nokia, it will not work further.

It has then silver color memory card ic, which gives the accruate supply to memory card jeck, with which it works. If it is damaged, then memory card will not show in gallery function of handset. Then the common problem we face in this handset is of bluetooth not working, in that case bluetooth function does not get on, so just make its jumper first i.e shortcut, just short two pins that are close to each other on left side of bluetooth ic points give, i will post its track pic also later. If it still not get ok, then just change the whole bluetooth ic.

Then comes it display problem, its main problem generally found in its display connector with alot of pins, resold it and check its tracks consistentaly, If this handset keeps on hanging, then repair its flash rom ics. And if unluckily its rpl file gets corrupt, then it has alot of expense near 700 rs. Its sound quality is some low.

6610 NOKIA MOBILE REPAIRING

Nokia 6610 is also a very good looking shining handset of silver and black, grey color comes in it. Its display same as of nokia 3100. Its internal pcb is some like 3100, but main power , flash and other ics are on front side in nokia 6610, as these are on backside of nokia 3100. Its keypad board is separately fitted on the main board by touching many pins on it, in which supply comes from keypad ic. Well if u face display not coming or in blue light, then check its small resistance under on/off switch on back side of pcb, change that two resitances or short them, the rest display connectors pins tracks goes on front side yellow points under display jeck. The fault of its charging can also be easily solved, by checking its fuse ic and r22 ic. If it makes not charging, then change its battery or charger problem. Its also sometimes makes ringer problem, i.e. very similar to nokia 3100, It has fm it and infrared also , by which we can transfer small kb files and fm can be repair by changing its black color fm ic. Then we can download alot of ringtones by using usb dku-5 cable or serial dku-5 cable. It supports .amr recording files, midi ringtone files, small images files like jpg, gif and games too i.e jad and jar files. One more advance model same like this handset is 6610i, which has extra feature of camera at back with average picture quality. If it gets software problem in it, then just flash it with mcu , ppm and cnt files and pm file for network, after that make ui settings, even many dead sets are also recoverd with help of software with ufs box, mt box, ub box, etc.

NOKIA 3100 HARDWARE SOLUTIONS

Well here is Nokia 3100 colored handset with attractive body look and soft keypads. In this two models were launched i.e. 3100 and 3120, the only difference in them was of outer appearance of their glossy bodies. In this most common problem facing of on/off switch, if by any way its positive track is missing, then we can make its jumper easily near left side of UEM IC. Then other common problem is of regarding network, which is checked by its rx, tx, and its antenna switch, PFO AND of Network ic i.e named as Hagar ic, just reball or change it. One fault generally comes of software in which only lights blink, then we can flash it fully with latest ufs files. And if its IMEI No. is corrupted, it can also be repair through Universal Box, or many rpl servers available onine in the market. If sets going off after particular 20seconds. then its major fault i.e. UEM Ic, and if we change UEM IC, the we have to rewrite its imei no. ie. of same of UEM ic. The other problem comes off ringer not working, Its mostly of ringer ic i.e of black color near sim tray, but before reparing, check its direction also when you have to change it with new one. As per ur demand, i will post its tracks pics and jumpers also .

REPAIRING OF NOKIA 1600

Dear nokia 1600 handset is a colored handset with polyphonic ringtones has loud sound. Its attractive look makes it famous inNokia world. It is the cheap and best colored handset with handsfree function also in it. Its repairing is somewhat like nokia 1110 as described above. One more point i would like to discuss in it, is that we can convert nokia 1110 to nokia 1600 or nokia 1600 to nokia 1110 by changing their softwares and display respectively. If it got ringer or speaker problem in it, like if both speaker and ringer not work, then just change its ringer because in this handset ringer and speaker is same. And if only speaker is not working, ringer is working, then check the small resistances on the front above side of the pcb that either any component is break or damaged with water. And if speaker is working and ringer not working, then check its ringer ic or change it. The other common problem in this handset comes is of handsfree symbol on display, inwhich speaker , mic and ringer stops working. so first of all check charing jeck of it, because if jeck is not touching the points properly or damaged by water, then change it. and if still it got problem, then check components near charging jeck points and ringer ic could also be short in this problem. Well its flash and UEM ic are fixed with gum. so it is difficult to repair. Cpu can repair because it is not fixed, and if handset has contact service problem in it or its going on hang or restart then just reball cpu or replace it.

NOKIA 1110 HANDSET SOLUTION

Nokia 1110 handset is a great black and white set with black background display with yellow color font displayed on it. Nokia 1110 has also polyphonic ringtones and loud sound and vibration with dustproof keypads. Its repairing is also simple and alot of jumpers like, if it has local mode problem or not charging problem, first check its battery, then its charging jeck, if it still does not get ok, then remove small resistance behind middle pin of battery connector, and also remove double resistance near on upper side of UEM Power ic, your local mode and not charging problem will be solved. If you got any network problem in it, first load pm file in it that is for network access and if network not come, then change its PFO ic first, if not then change its network ic. If any display problem in it, then change its display first, after that check its all display jeck tracks, its 2nd track from upper right side of the jeck goes near the yellow point on back side of the plate near ringer ic, and if track is missing, then just make the jumper with jumper wire. Its light problem can also be solved by changing its light ic at the bottom of the plate on front side, or if u want to solve the problem without light ic, then just take its similar ohm resistance or transistor which u can use from any nokia model like 3310 or old models, and can display light. well if need more knowldege and jumper pics, then just reply on my yahoo id. well here i off this topic now. see u

NOKIA 2300 REPAIR

Hi all viewers that are fresher in repairing field, for them here is some selected information how you can recover some faults in nokia 2300 handset. This is the nokia first FM radio working handset and it gets very popular at that time can say before 5 years. It has polyphonic ringtones and good features. Its internal pcb and circuit is some similar like nokia 1100, It has ringer ic in it, if ringtone does not work, first check ringer, then its tracks points where ringer touches, and if still not work, then just change the ringer ic by seeing ic direction properly. Charging problem solution is same like nokia 1100 as described below. It has FM radio ic fault also which is near battery connector, if radio not works, then just change that ic. Other fault that generally comes in it i.e. of software , like pressing on switch of mobile display shows blinking again and again, then we have to flash it with proper mcu, ppm, cnt and pm files by ufs box or jaf box. pm file is for network, cnt file for games and images, ppm and mcu are main bin files. and after that do all ui settings to open sim lock of it. Well reply if you got any other hardware problem in it, i will send u its shortcuts or jumper pics properly.

NOKIA 1100 ALL SUMARY ABOUT REPAIRING AND PARTS

Well, today me here to dictate about all summary of nokia 1100 repairing and its parts. Let starts from its features that it has some special functions. It is the first phone launched by nokia which has torch light function which has very sharp and white light by which we can use in our daily usage. Then it has dustproof keypads through which dust does not enter in it. It has great ringtone sounds, and vibrator and slim body. The main thing is that it has easy maintanence and repair. If it gets problem of network, like network not come, then it has rx (recieving signals) fault and for that we have to first remove its antenna switch, and make its jumpers in v shape separate for 900mhz and separate for 1800mhz. If network comes once and then goes off, then we have to check tx side like change its PFO. Then it gets sometimes charging problem in it, for that , first of all check its charging jeck, and then its fuse which should be short (check by analog multimeter ), and if still fault does not gets ok, then just make it direct by removing its black resistance and put the diode and then solder diode's gnd side to fuse, and its positive side on +ve pin of its battery connector, in that case mobile will not showing charging but it will get battery full, but be carefull you have to only plugin charger for 1 hour not more than that. Give comments or problems if you face any difficulty.